M a r k e t N e w s

South Africa: 3-D technology brings a lost mammalian ancestor back to life

Posted on : Tuesday , 4th October 2016

 At the very beginning of the 1960s, a South African palaeontologist embarked on a series of ambitious works. Dr A.S. Brink wanted to better understand the anatomy and evolution of humans' pre-mammalian ancestors, the therapsids.

 
Brink worked with therapsid skulls found in South Africa's Karoo region. He ground the skulls at thin and regular intervals to assess their internal cranial anatomy. The technique, known as serial grinding, was commonly used at the time.
As he neared the end of the process on one of the skulls Brink realised that he had uncovered a unique specimen. The skull represented a holotype, which is the single specimen used in the definition of any new species. But by then it was too late.
 
More than 50 years later, we were among a group of scientists who followed in Brink's footsteps. Our task was to recreate this unique specimen. Technology has moved on enormously in the last half century, so we were able to use 3-D renderings and 3-D printing – and one of our mammalian ancestors was reborn.
 
Historical techniques
 
South Africa was a good place for Brink's work. The country's Karoo region is home to a wealth of therapsid fossils, making it an important place to study the ancestry of mammals.
 
Brink was not the first palaeontologist to use serial grinding. The technique emerged at the beginning of the 20th century. Before then scholars had to wait for the discovery of naturally preserved casts of internal structures, like the mold of the "fossil brain" of the Taung Child, Australopithecus africanus. Or they had to break fossils open.
 
With its introduction, serial grinding became the only fully controlled way to access the "interior" of fossils. Because of their abundance, South African therapsids were among the first fossils to be studied using this new, revolutionary approach. Sadly, their abundance turned out to be a curse.
 
Accidental destruction
 
In 1961, Dr Brink started the serial grinding study of a well preserved skull. At this stage, he thought the specimen belonged to a common form of therapsid.
 
But during the process, the sections revealed anatomical structures that suggested the specimen may actually represent a new species of fossil therapsid previously unknown to science. By then it was too late to save the fossil: it had already been mostly ground down. Brink tried to compensate by making a very thorough and accurate description and drawings of the specimen. He named it Scalopocynodon gracilis.
 
As in zoology, the designation of type specimens is the most critical step when naming a new species in palaeontology. This type specimen, called a holotype, is meant to serve as an anatomical reference for future comparative works. A new species can't be recorded without a holotype. So this ground specimen was particularly important: it constituted the holotype of Scalopocynodon gracilis.
 
Sadly this valuable and irreplaceable piece of South Africa's heritage and evidence of the evolution of pre-mammalian therapsids was lost. The irony is that it was destroyed by the very author of the species.
Scalopocynodon was considered dead and forgotten – until 2016.
 
 
Recreating our ancestor in 3-D
 
It's then that a team from the Evolutionary Studies Institute at Johannesburg's University of the Witwatersrand retrieved some of Dr Brink's drawings of the Scalopocynodon gracilis from 1961. These drawings represent each thin section ground by Brink. Their detail presented us with an unprecedented opportunity to virtually reconstruct the long lost specimen of Scalopocynodon gracilis.
 
The drawings were digitised. Then, using cutting edge software and innovative computer-based technology, every slice was digitally reassembled in a single stack. This allowed us to reconstruct a 3-D model of the original skull. Afterwards a physical model of Scalopocynodon was printed in 3-D so we could recreate a life-sized reconstruction of this specimen.
To our knowledge, this is the first time 3-D technology has been used to recreate and print in 3-D a serially ground fossil vertebrate (though it is quite often used in invertebrates palaeontology).
 
This is a great initiative for South African heritage conservation. These techniques can be used on other fossils lost through serial grinding.
 
 

Source : phys.org
Featured Companies
  • Scan Holdings- Easy Open Ends, Penny Lever Lid, Spray dried coffee, Freeze dried coffee powder, Agglomerated Coffee, Beer Cans, Beer Neck Foils
  • /
  • Unipak Nile - Manufacturer of Corrugated Boxes & Displays - Egypt

Complete List  

Advertisers in previous issue:

  •  Ipex is dedicated to managing the brands of world leading printing & related machinery manufacturers ensuring that we supply machinery from manufacturers of technologically advanced equipment, tailor-made for the Printing, Packaging and   Converting
  • Products includes adhesive tapes, masking tapes etc
  • Nile Trade Fairs focuses in International trade fairs & conferences to be ideal platforms for foreign and local companies doing business in the Middle East
  • Used plastic machinery
  • Vuega Packaging Industries is a leading supplier of industrial & consumer packaging solutions in UAE.
  • Manufacturer exporter of Paper Converted Stationery Products for the School & Office Segment.
  • Preparing the PE raw materials in the shape of powder.
  •  Paperex – ‘12th International Exhibition & Conference on Pulp & Paper Industry
  • Proven, high quality, reliable and cost effective solution for a wide variety of coding & marking applications.
  • Machines
  • Rawasy Al Khaleej Plastic Ind. is an integrated packaging company manufacturing rigid & flexible packaging products.
  • Directed its efforts towards the needs of developing countries of Central, Middle Asia and East Africa for shipping of Packing Equipment and materials for food, beverages, household chemicals and cooking oil industry
  • NMC is an internationally leading company active in the development, production and marketing of synthetic foams.
  •  PANASIA TECH is a Hong Kong based company with various Original Equipment Manufacturing partners in Mainland China and India.
  • Radhekrishna, a leading mechanical engineering enterprise in India,
  • Unipak Nile Ltd. manufactures corrugated containers, carton packaging, high-graphics shelf-ready packaging, and promotional point-of-purchase displays and counter stands.
  • Astro films, a quality conscious film manufacturer offer the best quality product in packaging film spectrum.
  • Plastic products
  • The   Stratex    company   was  founded  in  2002  in  response  to  the  urgent  needs of  Western humanitarian aid organizations in  Central  Asia.
  •  At Maple Leaf Plastic, we specialize in offering great savings to our customers by creating customized solutions to suit their individual needs.
  • Shree Ambica Industries is one of the most dynamic, technology driven company, which offers tailor made packaging solutions
  • LOHIA CORP LIMITED formerly known as Lohia Starlinger Limited started in the year 1981 to address the flexible packaging needs of various sectors of industry in India
  • It is publication which is serving the food & package industries in Asia.
  • Injection molding machines
  • HP Indigo digital press, a division of HP, Hewlett Packard, is the world’s leading provider of high end, high quality, color digital printing solutions.
Afrotrade International Marketing, Tel: +971-50-6285684
© 1998-2019 Afrotrade